VLE models
Functions of (\gamma_1, \gamma_2) = \mathrm{f}(x_1, T), where \gamma_i is activity coefficient,
x_1 is mole fraction, T is temperature [K] and t is temperature [°C].
Content
- Margules
- van Laar
- NRTL (extended)
- UNIQUAC (extended)
Margules
\ln \gamma_1 = x_2^2 \left( A_{12} + 2 x_1 (A_{21}-A_{12}) \right)
\ln \gamma_2 = x_1^2 \left( A_{21} + 2 x_2 (A_{12}-A_{21}) \right)
Both parameters A_{12} and A_{21} are symmetric and dimensionless.
van Laar
\ln \gamma_1 = A_{12} \left( \frac{A_{21} x_2}{A_{12} x_1 + A_{21} x_2} \right)^2
\ln \gamma_2 = A_{21} \left( \frac{A_{12} x_1}{A_{12} x_1 + A_{21} x_2} \right)^2
Both parameters A_{12} and A_{21} are symmetric and dimensionless.
NRTL (extended)
The basic NRTL is the same, but with only first 5 parameters a_{12} a_{21} b_{12} b_{21} c_{12}, the rest are zero.
\ln \gamma_1 = x_2^2 \left( \tau_{21} \left( \frac{G_{21}}{x_1 + x_2 G_{21}} \right)^2 + \frac{\tau_{12} G_{12}}{(x_2 + x_1 G_{12})^2} \right)
\ln \gamma_2 = x_1^2 \left( \tau_{12} \left( \frac{G_{12}}{x_2 + x_1 G_{12}} \right)^2 + \frac{\tau_{21} G_{21}}{(x_1 + x_2 G_{21})^2} \right)
Where G_{ij} and \tau_{ij} are intermediately calculated as:
G_{12} = e^{-\alpha_{12} \tau_{12}}
G_{21} = e^{-\alpha_{21} \tau_{21}}
\tau_{12} = a_{12} + b_{12}/T + e_{12} \ln T + f_{12} T
\tau_{21} = a_{21} + b_{21}/T + e_{21} \ln T + f_{21} T
\alpha_{21} = \alpha_{12} = c_{12} + d_{12} t
Params table
| symbol |
a_{12} |
a_{21} |
b_{12} |
b_{21} |
c_{12} |
d_{12} |
e_{12} |
e_{21} |
f_{12} |
f_{21} |
| UoM |
1 |
1 |
K |
K |
1 |
1/°C |
1 |
1 |
1/K |
1/K |
Note: c and d are symmetric, the rest are not.
UNIQUAC (extended)
The basic UNIQUAC is the same, but with only first 8 parameters q_1 q_2 r_1 r_2 a_{12} a_{21} b_{12} b_{21}, the rest are zero.
\ln \gamma_1 = \ln \gamma_1^\mathrm{C} + \ln \gamma_1^\mathrm{R}
\ln \gamma_2 = \ln \gamma_2^\mathrm{C} + \ln \gamma_2^\mathrm{R}
Where C stands for combinatorial part, and R for residual part:
\ln \gamma_1^\mathrm{C} = l_1 + \ln J_1 + 5 q_1 \ln \frac{L_1}{J_1} - J_1 \overline{l}
\ln \gamma_2^\mathrm{C} = l_2 + \ln J_2 + 5 q_2 \ln \frac{L_2}{J_2} - J_2 \overline{l}
\ln \gamma_1^\mathrm{R} = q_1 \left( 1 - \ln s_1 - \frac{\theta_1}{s_1} - \frac{\theta_2 \tau_{12}}{s_2} \right)
\ln \gamma_2^\mathrm{R} = q_2 \left( 1 - \ln s_2 - \frac{\theta_1 \tau_{21}}{s_1} - \frac{\theta_2}{s_2} \right)
Parameter q_i means dimensionless surface areas, while r_i means numbers of segments (or dimensionless volumes).
Other parameters are binary interaction parameters.
l_i are coordination numbers:
l_i = 5 (r_i-q_i) + 1 - r_i
\overline{l} = x_1 l_1 + x_2 l_2
\phi_i is segment volume fraction, J_i is just without x_i to avoid division by zero when x_i=0:
\phi_i = \frac{ r_i x_i }{ x_1 r_1 + x_2 r_2 }
J_i = \frac{ r_i }{ x_1 r_1 + x_2 r_2 }
Same for surface are fraction \theta_i and L_i:
\theta_i = \frac{ q_i x_i }{ x_1 q_1 + x_2 q_2 }
L_i = \frac{ q_i }{ x_1 q_1 + x_2 q_2 }
Binary interaction terms are calculated as follows:
\ln \tau_{12} = a_{12} + b_{12}/T + c_{12} \ln T + d_{12} T + e_{12} T^2
\ln \tau_{21} = a_{21} + b_{21}/T + c_{21} \ln T + d_{21} T + e_{12} T^2
s_1 = \theta_1 + \theta_2 \tau_{21}
s_2 = \theta_1 \tau_{12} + \theta_2
Params table
| symbol |
q_1 |
q_2 |
r_1 |
r_2 |
a_{12} |
a_{21} |
b_{12} |
b_{21} |
c_{12} |
c_{21} |
d_{12} |
d_{21} |
e_{12} |
| UoM |
1 |
1 |
1 |
1 |
1 |
1 |
K |
K |
1 |
1 |
1/K |
1/K |
K^-2 |
Note: e is symmetric, the rest are not.